MediaLector is NOA’s ingest tool for quality controlled mass migration of DATs, Cassette Tapes and MiniDiscs for Job Database or mediARC system. NOA MediaLector, consisting of the MediLactor4 or MediaLector8 software running on the N6073 host is capable of transferring four or eight stereo sources in parallel with 16-bit, 44.1 kHz/48 kHz quality, extracting the audio information, annotating relevant subcode information (DAT and MiniDisc only) while scanning the signal using NOA’s algorithmic detection. Additionally, MediaLector constantly monitors the status of the DAT drives‘ error correction stages, and annotates the quality-relevant status data synchronously to the audio stream with SONY PCM 7040 and NOA adapted R500 DAT. The result is a 100% documented audio transfer with a digitisation proof stamp written to the database along with the audio material.
|
|
|
FACTS & FEATURES
- Batch transcription maximised throughput
- availabale as MediaLector4 and MediaLector8 software
- Load Task for Job Database or mediARC
- Create and edit cue and quality points during recording
- Set all-time undo Trim Points for Start and Stop of the audio
- Manual load Mode
- Auto Mode (upon pre-sorted lists)
- Barcode Mode
- Automatic carrier manipulation (hands-off operation)
- Audio stream resolution: 16-bit/44.1 kHz or 48 kHz
Supported Cartridge Players and DAT:
- Tascam 801 MD Deck*
- Tascam Cassette MC 322*
- Tascam 322 Double Cassette Deck *
- (* requires AD converter)
- SONY DAT PCM 7040
- SONY DAT R500 with NOA R500 hardware adaptation kit
Digital quality information in DAT Mode:
- BLER L/R traces
- Digital mutes
- Digital interpolations
- Physical read problems
- Sample rate changes
- Subcode index
- Start, stop, end ID
|
|
|
|
|
|
Products 
