NOA Record is an ingest system for three parallel analog stereo input
streams consisting of the NOA Record software, the N6071 Workstation,
and the N6000A hardware, including high-quality A/D converters and
replayer communication modules.
NOA Record offers a clearly structured user interface for multiple
simultaneous sources. The relevant recording and playback parameters of
all stations are displayed on a single screen which is divided into
section panels, thereby providing the user with an overview of the most
important functions at a single glance. Quality assessment can be done
directly in the capturing software or within the workflow system at a
later stage.
One section shows the current activity of the algorithmic recognition
while the marker list shows recognised quality events and displays all
cyclic events in a graphical overview. The recording job can be marked
as „critical” in the event of measurable parameters straying beyond the
user-defined thresholds. Suggestions are entered into a comment field,
which is stored together with the recording and can be viewed either
from within the Job Database/mediARC or Record Software.
High Precision control tools at a glance
The input of the active station is monitored automatically. Users can
activate more than one solo button to hear a mix of the selected
stations. The upper part of the control section displays all relevant
functions of the remote controlled playback machine and allows machine
operation directly from the desktop. A highly accurate time display
shows the actual playback and recording positions, while precision
programme peak meters monitor the signal level.
|
|
 N6000A Mainframe connected to N6071  Play while record with zoomed in TAS control  3 stereo or mono replayers can be combined per NOA Record |
|
FACTS & FEATURES
- Three parallel stereo recordings per default
- Append record support for multicarrier volumes
- Freely configurable setups loadable at startup with single click (eg, Set1: A807/EMT/A80, Set 2: A807/812/807, Set 3:Tascam322/vinyl/807)
- Adjustable record stop time (on time, on tape end)
- Access all algorithmic quality information in realtime and over TAS
- Play while record (Play Snap)
- Load task from mediARC or Job Database
- Consistent barcode reader support
- Use of Tape Light Barrier N6035A
- User management
- Create and edit cue and quality points during recording
- Set all-time undo trim points for start and stop of the audio
- Fast realtime PPM
- Overall view of whole recorded file
- Detailed display of waveform, cue events and quality statistics
- Accurate time display
- Zoom in/out horizontally and vertically
- Multiple ANSI Support for datafields available (Vietnamese, Arabic, Russian, …)
- Link machine and station for simultaneous record operation
- Freely configurable GPIO connection for non RS232 machines over ParallelPort DB25
- Control winding speed for replayers over RS232 (A807MKII, A810, A812, A820)
- Set replayer equalization over RS 232 (A807MKII, A810, A812, A820)
- Direct control of amplification gain of AD Converters N6191 and N6192 from software
- Direct control of equalisation curves for vinyl and 78s (see N6192 Converter) from software
- Activate solo listening, dim monitor signal, mute L+R channel together and separately (N6000A hardware)
- Adjust monitor volume levels for each station separately
|
|
TECHNICAL DATA NOA RECORD SOFTWARE
- Bit resolution 32-bit Float
- Internal precision 64-bit
- Operating system WindowsXP
- Remote controlled machines supported Studer A 820, Studer A 807, Studer A 810, Telefunken M15 A to M 21, EMT 938 Record Player, all players with GPIO remote control
- Latency of monitor section <3ms
|
|
|
Products 
